|
|
|
|
|
|
08-0029 - Motion Pro Honda MX/ATC Shock Wrench
|
List Price: $17.90
Our Price: $14.55
You save $3.35!
|
|
|
* Heat treated alloy steel
* Fits many street, offroad and ATV single shock applications
* Fits Honda ATC 200/250R/350X
* Fits 68 and 87 mm lock rings with a 8 mm notch
|
|
|
|
|
|
|
|
|
|
08-0139 - Motion Pro HD Fork Cap Nut Socket
|
List Price: $21.50
Our Price: $17.35
You save $4.15!
|
|
|
Use for removal and installation of the fork cap nut (1 3/8 inch hex)
Fits most Big Twin and Sportster models
Thin socket measures only 9/32 in. deep by 5/8 in. tall
O-ring insert to help protect the top of the cap
Sold each
|
|
|
|
|
|
|
|
|
|
08-0121 - Motion Pro Fork Oil Level Gage
|
List Price: $23.99
Our Price: $21.75
You save $2.24!
|
|
|
For checking and adjusting the oil level on all conventional and inverted forks
Adjustable ring will measure oil levels from 0-300mm in 0.5cm increments
Syringe has a capacity of 60ml
Can be used on bicycles equipped with front suspension
|
|
|
|
|
|
|
|
|
|
RT-1 - Park Tool Steering Race Remover (1"-1-1/2")
|
List Price: $46.00
Our Price: $27.95
You save $18.05!
|
|
|
The Park Tool Steering Race Remover makes head tube bearing race removal easy.
The tool is pulled through the steering tube until the flared ends snap in behind the race.
A blow to the tool head removes the race.
Tool fits most brands with 35–55 mm bearing races.
RT-1 (1”- 1-1/2”).
For larger races see the RT-2 (1-1/2” - 2-3/16”)
|
|
|
|
|
|
|
|
|
|
RT-2 - Park Tool Steering Race Remover (1-1/2" - 2-3/16")
|
List Price: $46.00
Our Price: $27.95
You save $18.05!
|
|
|
The Park Tool Head Race Remover makes head tube bearing race removal easy. The tool is pulled through the steering tube until the flared ends snap in behind the race. A blow on the tool head removes the race. RT-2 fits most brands with 35–55 mm (1.1/2" - 2 3/16") bearing races.
Generally speaking, the RT-2 will fit most brands of larger motorcycles, (125cc's and up) both dirt bikes and street bikes and newer Harley Davidson's.
For smaller bearings see the RT-1 (1-1/2” - 2-3/16”).
|
|
|
|
|
|
|
|
|
|
08-0124 - Motion Pro Fork Seal Driver 43mm
|
List Price: $41.99
Our Price: $40.95
You save $1.04!
|
|
|
Fits 43 mm fork legs
CAD-II plated carbon steel split design
Weighs approximately 25oz.
|
|
|
|
|
|
|
|
|
|
08-0170 - Motion Pro Fork Seal Driver 39mm
|
List Price: $64.90
Our Price: $53.70
You save $11.20!
|
|
|
CAD-II plated carbon steel split design
Each driver weighs approximately 25oz.
Sold individually
|
|
|
|
|
|
|
|
|
|
|
08-0123 - Motion Pro Fork Seal Driver 41mm
|
List Price: $66.60
Our Price: $54.95
You save $11.65!
|
|
|
Fits 41 mm fork legs
CAD-II plated carbon steel split design
Weighs approximately 25oz.
|
|
|
|
|
|
|
|
|
|
|
08-0125 - Motion Pro Fork Seal Driver 45mm
|
List Price: $66.60
Our Price: $54.95
You save $11.65!
|
|
|
Fits 45 mm fork legs
CAD-II plated carbon steel split design
Weighs approximately 25oz.
|
|
|
|
|
|
|
|
|
|
08-0138 - Motion Pro Fork Seal Driver 46/47mm
|
List Price: $66.60
Our Price: $54.95
You save $11.65!
|
|
|
Fits 46 mm and 47 mm fork legs
CAD-II plated carbon steel split design
Weighs approximately 25oz.
|
|
|
|
|
|
|
|
|
|
CRS-2M - Park Tool Steering Tube Bearing Installer
|
List Price: $110.85
Our Price: $69.95
You save $40.90!
|
|
|
The CRS-2M offers a new, safe approach to lower bearing installation. This unique system utilizes specially designed, aluminum inserts to quickly and accurately install nearly any lower bearing.
Simply choose the correct insert, slide the setting driver over the steering tube and tap the bearing into place with a hammer, avoiding any risk of damage.
The CRS-2M includes three specially shaped aluminum inserts (1”, 1-1/8” and 1-3/8”) and a heat-treated, universal setting driver.
Now fits Honda Gold Wing!
|
|
|
|
|
|
|
|
|
|
HHP-2M - Park Tool Steering Race Press
|
List Price: $215.50
Our Price: $175.95
You save $39.55!
|
|
|
The Park Tool HHP-2M easily and accurately presses steering head tube races, eliminating damaged, or misaligned bearing races and helps prevent dented and chipped frames. Our unique design permits quick tool installation and release after races are seated. The heat-treated bushings (included) provide a precise fit and alignment for most brands.
Now fits Honda Goldwing!
|
|
|
|
|
|
|
|
|
|
08-0072 - Motion Pro Nitrogen Shock Gauge & Filler
|
List Price: $214.50
Our Price: $181.70
You save $32.80!
|
|
|
300 psi capacity
Bleeder valve and T-handle plunger pin chuck
Swivel chuck has a 12 inch flexible hose
Instructions, carrying box and Schrader valve extension included (required on some Showa shocks)
Replacement Shrader valve extension is item 08-0132
Made in the U.S.A.
Regulator and transfer hose required to get Nitrogen from tank to Nitrogen Shock Gauge and Filler.
For regulator and transfer hose set use part number 08-0414 (08-0414 does not include 08-0072).
For transfer hose only use part number 08-0413 (does not include Inert gas regulator or 08-0072).
|
|
|
|
